The 2011 and new Chevrolet Caprice Police Vehicle is quickly becoming a popular choice for law enforcement professionals nationwide. With the new Police Package Headlight Flasher plugin, you can use this headlight flasher to use your vehicles natural warning system - your head lights!
Features:
Easy installation with plug-in connectors for police package models
Single flash pattern, PowerPulse, a fast alternating pattern at 3.0 flashes per second
Mounting bracket designed for easier installation in tight spaces
Features High Beam Override to disengage flasher for normal high beam function
Built-in Shutdown Protection against loss of ground & under voltage
Durable & non-corrosive ABS plastic housing
100% Solid State, potted design for long-lasting, reliable performance
2 -55 watt outputs
9 - 16 Vdc
5 Year No Hassle Warranty
Congratulations! You are now the proud owner of the most technically advanced true 100% Solid State Selectable Pattern Headlight Flasher System in the market today. Add to it our never ending commitment to quality, when properly installed this new Flasher System will provide you with years of dependable trouble free service. When used at night, the low beam headlights remain ON for proper illumination while the high beams fl ash to gain attention and increase the vehicle's visibility. When the dimmer switch is activated to high beam, the fl asher system's “High beam over-ride" interrupts the fl asher sequence to allow normal high beam function. Flashing automatically resumes when the dimmer switch is de-activated. Note: Flashing Headlight and Taillight Systems are intended for approved vehicles only. The user of this system is responsible to ensure compliance to any Federal, State or Municipal regulations, which may apply. Mounting: The enclosed headlight flasher has been designed to be water resistant. However, to ensure years of trouble free operation of the fl asher system, it should be mounted in a location that is protected from direct water spray and high temperatures. The bracket is mounted to the vehicle by drilling 2 holes in the radiator support, and installed with two 3/16" rivets or #8 nuts, bolts and lock washers (installer supplied), behind the RH head lamp. The fl asher is oriented on the bracket as shown in the picture, with the wires exiting at the lower edge of the bracket. Electrical Installation: 1. Carefully route the 2 wire and 6 wire harness with the connector to the vehicle's mating connector making sure the harness will not interfere with the moving vehicle components and will not get damaged in field operation. Connect fl asher with mating vehicle connector.