Description:
This Flashlight is cETLus, ATEX, and IECEx listed Intrinsically Safe for use in both above and below ground hazardous locations where explosive gases and dusts may be present. The 5418 uses a CREE® LED rated at 200 lumens that works with a deep parabolic reflector to create a 143 meter flashlight beam. The tail switch provides momentary or constant-on functionality. This light meets the requirements of NFPA-1971-8.6 from 3 AA premium batteries (not included). The mount can be attached to either side of the helmet to provide hands-free illumination. Additionally, the user can set the angle of the mount through 140 degrees of adjustment to provide clearance around face shields, goggles or other helmet-mounted equipment. cETLus, ATEX, and IECEx listed Intrinsically Safe for use in both above and below ground hazardous locations where explosive gases and dusts may be present CREE® LED technology 50,000 + hours LED life Momentary or constant-on flashlight Sharp focused flashlight beam for distance illumination Polymer housing Non-slip grip Tail switch Mount can be attached to either side of helmet Mount allows for clearance around face shields, goggles or other helmet-mounted equipment Dustproof / Waterproof Impact & chemical resistant Meets Requirements of NFPA-1971-8.6 (2013) 3 AA batteries (not included) Limited Lifetime Warranty Specifications UPC: 017398806206 Flashlight Lumens: 200 Beam Distance: 143 m Candela: 5,129 Drop Rating: 2 m Dust/Water Rating: ANSI IP-67 Dustproof / Waterproof Flashlight Runtime: 10 hrs Switch Function: Momentary or constant-on Length: 5.6 in (142 mm) Weight: 5.4 oz (153 g) Handle Diameter: 0.75 in x 1.4 in (19 mm x 35 mm) Head Diameter: 1.5 in (38 mm) Light Source: LED Case Material: Glass-filled nylon polymer Body Color: Green Quantity of Batteries: 3 Power Source: AA Batteries Package Contents: Flashlight, lanyard, 3 AA batteries and multi-angle mount Warranty: Limited Lifetime
